How To Shorten Faux Wood Blinds?

Looking to shorten your faux wood blinds? We’ve got you covered!
Shortening faux wood blinds is a quick and easy DIY project that can instantly transform the look of your windows. Whether you want to customize the length for a perfect fit or update the style, this guide will walk you through the steps to shorten your blinds effectively. Say goodbye to those long, cumbersome blinds and hello to a sleek and tailored window treatment.

how to shorten faux wood blinds

Step-by-Step Guide to Shortening Faux Wood Blinds

Faux wood blinds are a popular choice for window treatments due to their durability and aesthetic appeal. However, if you have purchased faux wood blinds that are too long for your windows, you may need to shorten them to achieve the perfect fit. Fortunately, shortening faux wood blinds is a relatively simple process that can be done with just a few tools and some basic knowledge.

Materials Needed:

  • Faux wood blinds
  • Measuring tape
  • Scissors or a saw
  • Marker or pencil
  • Screwdriver or drill (depending on the type of blinds)

Step 1: Measure the Blinds

The first step is to measure the length of the blinds to determine how much needs to be shortened. Extend the blinds fully and measure from the top of the headrail to the desired length. Make a mark on both sides of the blinds to indicate where they should be cut.

Step 2: Remove the Bottom Rail

Most faux wood blinds have a bottom rail that can be easily removed. Use a screwdriver or a drill (depending on the type of blinds) to remove the screws or clips that hold the bottom rail in place. Once the bottom rail is detached, set it aside for now.

Step 3: Trim the Slats

Next, you’ll need to trim the slats of the blinds to match the desired length. Lay the blinds flat on a sturdy surface and use scissors or a saw to carefully cut through each slat at the marked location. Take your time to ensure clean, straight cuts.

Step 4: Reattach the Bottom Rail

After the slats have been trimmed, reattach the bottom rail to the blinds. Align the holes in the rail with the corresponding holes in the slats and secure them together using the screws or clips that were removed earlier. Make sure the rail is centered and level before tightening the screws or clips.

Step 5: Test and Adjust

Once the bottom rail is securely attached, test the blinds to make sure they are functioning properly. Raise and lower the blinds to ensure they move smoothly and evenly. If necessary, make any final adjustments to the length by removing the bottom rail and trimming additional slats.

Step 6: Install the Blinds

Finally, it’s time to install the blinds back in your window. Follow the manufacturer’s instructions for mounting the brackets and inserting the blinds into the brackets. Use a level to ensure that the blinds are straight and adjust as needed.

Summary

Shortening faux wood blinds can be a simple DIY project that allows you to customize the fit of your window treatments. By following these step-by-step instructions and using the right tools, you can achieve the perfect length for your faux wood blinds. Remember to measure carefully, trim the slats evenly, and test the blinds before reinstalling them. With a little patience and attention to detail, you’ll have beautifully shortened faux wood blinds that enhance the look and functionality of your windows.

Expert Techniques for Shortening Faux Wood Blinds

If you have purchased faux wood blinds for your windows and they are too long for your specific window size, you may need to shorten them. Shortening faux wood blinds may seem like a daunting task, but with the right techniques and tools, it can be done easily. In this section, we will discuss some expert techniques that will help you shorten your faux wood blinds without any hassle.

See also  What Is White Wood At Lowes?

1. Measure and Mark

The first step in shortening faux wood blinds is to measure and mark the desired length. Use a measuring tape to determine the exact length you want your blinds to be. Once you have the measurement, mark it with a pencil or a piece of tape.

2. Remove the Slats

Next, you’ll need to remove the excess slats from the bottom of the blinds. Gently lift the bottom rail and locate the plastic plugs on both ends. Carefully remove the plugs to access the ladder cords.

3. Untie or Cut the Ladder Cords

Once you have access to the ladder cords, you’ll need to untie or cut them, depending on the type of blinds you have. If the ladder cords are tied, simply untie the knots. If they are secured with metal or plastic clips, carefully cut the cords above the clips.

4. Remove Excess Slats

After you’ve untied or cut the ladder cords, you can now remove the excess slats from the bottom rail. Gently slide them out until you reach the desired length marked earlier. Be cautious not to damage the slats or the blinds while doing this.

5. Reattach the Bottom Rail

Once you have removed the excess slats, it’s time to reattach the bottom rail. Line up the holes on the rail with the ladder cords and gently push the rail back into place. Make sure it is securely attached before moving on to the next step.

6. Retie or Reattach the Ladder Cords

Now that the bottom rail is in place, you’ll need to retie or reattach the ladder cords. If you untied the cords, simply re-tie them securely. If you cut the cords, you can use a ladder cord connector or a small piece of string to reattach them.

7. Test and Adjust

Before hanging your shortened faux wood blinds back on your window, it’s important to test and adjust them. Operate the blinds up and down to ensure they are functioning properly and are the desired length. If adjustments are needed, repeat the steps above until you achieve the perfect fit.

8. Hang the Blinds

Once you are satisfied with the length and functioning of your faux wood blinds, it’s time to hang them back on your window. Use the brackets provided and follow the manufacturer’s instructions for proper installation. Make sure the blinds are level and secure before finishing the installation process.

Shortening faux wood blinds may require some time and patience, but with these expert techniques, you can easily achieve the desired length for your windows. Remember to measure carefully, remove the excess slats properly, and test the blinds before hanging them back up. By following these steps, you’ll have perfectly fitted faux wood blinds that enhance the look of your windows.

Troubleshooting Common Problems when Shortening Faux Wood Blinds

Faux wood blinds are a popular choice for window treatments due to their durability, affordability, and aesthetic appeal. However, when it comes to customizing the size of these blinds to fit your windows perfectly, problems can sometimes arise. In this section, we will discuss some common issues that may occur when shortening faux wood blinds and provide troubleshooting tips to help you overcome them.

1. Uneven or Crooked Bottom Rail

One common problem that may occur when shortening faux wood blinds is an uneven or crooked bottom rail. This can happen if the blind slats are not cut evenly or if the strings that hold the blinds in place are not properly adjusted. To troubleshoot this issue, follow these steps:

See also  Does Bleach Damage Wood?
  1. Remove the blinds from the window and lay them flat on a clean surface.
  2. Measure the desired length for your blinds and mark it with a pencil.
  3. Use a hacksaw or a pair of sharp scissors to cut the excess slats.
  4. Check the bottom rail to ensure it is straight. If it is uneven, gently bend it back into shape.
  5. Adjust the strings on both sides of the blinds to ensure they are evenly distributed.
  6. Rehang the blinds and test to see if the bottom rail is now straight and even.

2. Difficulties in Reattaching the Bottom Rail

Another common issue when shortening faux wood blinds is difficulties in reattaching the bottom rail after cutting the excess slats. This can happen if the rail clips are not aligned properly or if the strings are tangled. To troubleshoot this problem, follow these steps:

  1. Remove the blinds from the window and lay them flat on a clean surface.
  2. Measure the desired length for your blinds and mark it with a pencil.
  3. Use a hacksaw or a pair of sharp scissors to cut the excess slats.
  4. Carefully align the rail clips with the cut end of the slats.
  5. Insert the slats into the rail clips, ensuring they are securely attached.
  6. Untangle any tangled strings and ensure they are properly threaded through the slats.
  7. Rehang the blinds and test to see if the bottom rail is securely attached.

3. Stiff or Jammed Control Cord

If the control cord of your faux wood blinds becomes stiff or jammed after shortening, it can be frustrating to operate the blinds smoothly. To troubleshoot this issue, follow these steps:

  1. Remove the blinds from the window and lay them flat on a clean surface.
  2. Inspect the control cord for any tangles, knots, or debris.
  3. Gently untangle any knots or remove any debris that may be causing the stiffness or jamming.
  4. Apply a small amount of lubricant, such as silicone spray or dry lubricant, to the control cord.
  5. Slowly operate the blinds up and down to distribute the lubricant evenly.
  6. Rehang the blinds and test to see if the control cord moves smoothly.

Summary

Shortening faux wood blinds can be a simple task with the right knowledge and troubleshooting techniques. By following the steps outlined above, you can overcome common problems such as uneven or crooked bottom rails, difficulties in reattaching the bottom rail, and stiff or jammed control cords. Remember to take your time, measure accurately, and make adjustments as needed to ensure your faux wood blinds fit perfectly and function smoothly.

Frequently Asked Questions about Shortening Faux Wood Blinds

When it comes to window treatments, faux wood blinds are a popular choice for many homeowners. They offer the classic look of real wood blinds at a more affordable price point. However, one common concern that homeowners have is whether they can shorten faux wood blinds to fit their windows. In this section, we will answer some frequently asked questions about shortening faux wood blinds.

1. Can I shorten my faux wood blinds?

Yes, you can shorten your faux wood blinds to fit your windows. Faux wood blinds are typically made of composite materials that can be easily trimmed to the desired length. However, it’s important to note that there are some limitations to how much you can shorten them. It’s recommended to check the manufacturer’s instructions or consult a professional if you’re unsure about how much you can trim.

2. What tools do I need to shorten faux wood blinds?

To shorten faux wood blinds, you will need a few basic tools:

See also  Does Wood Absorb Sound?
  • Measuring tape
  • Pencil
  • Hacksaw or miter saw
  • Sandpaper
  • Tape measure
  • Safety goggles

These tools will help you measure and cut the blinds to the correct length.

3. How do I measure faux wood blinds for shortening?

Start by measuring the width of your window frame. This will determine the width of your blinds. Next, measure the length from the top of the window frame to the desired length for your blinds. Add an extra inch to allow for mounting brackets and ease of operation. These measurements will guide you in shortening your faux wood blinds to the correct size.

4. Can I adjust the slat width when shortening faux wood blinds?

No, adjusting the slat width is not possible when shortening faux wood blinds. The slat width is determined by the manufacturer and cannot be altered during the shortening process. If you require a specific slat width, it’s important to choose blinds with the desired width from the start.

5. Should I hire a professional to shorten my faux wood blinds?

Shortening faux wood blinds can be a DIY project for those with basic handyman skills. However, if you’re unsure about the process or if you have complex window configurations, it may be best to hire a professional. They can ensure that the blinds are properly cut and installed for a perfect fit.

In summary, yes, you can shorten faux wood blinds to fit your windows. With the right tools and measurements, you can trim them to the desired length. However, it’s important to follow the manufacturer’s instructions and exercise caution during the cutting process. If in doubt, consult a professional to ensure a proper fit and finish.

FAQs

1. How do I shorten faux wood blinds?

To shorten faux wood blinds, you will need to remove the excess slats from the bottom. Measure the desired length, mark it accurately, and then use a saw or a pair of sharp scissors to cut the excess slats. Make sure to smooth out any rough edges afterwards.

2. Can I shorten my faux wood blinds without cutting them?

No, it is not possible to shorten faux wood blinds without cutting them. Since the slats are usually made of a rigid material, such as PVC or vinyl, cutting is the most effective way to adjust their length.

3. Is it easy to shorten faux wood blinds?

Shortening faux wood blinds can be a DIY task, but it requires some basic tools and careful measurements. If you feel unsure or uncomfortable, it’s always best to seek professional help or consult the manufacturer’s instructions to ensure proper adjustment.

Conclusion

In conclusion, if you’re looking to shorten your faux wood blinds, there are a few methods you can try. First, carefully measure the desired length and mark it on the blinds. Then, using a hacksaw or a pair of sharp scissors, cut the excess slats evenly. Remember to file any rough edges to prevent splintering. Alternatively, you can remove the bottom rail and reattach it at the desired length. Whichever method you choose, always exercise caution and follow the manufacturer’s instructions to ensure safety and maintain the functionality of your blinds.


Shortening faux wood blinds can be a DIY project that allows you to customize your window treatments to fit perfectly in your space. By following the steps mentioned above, you can achieve the desired length and enhance both the appearance and practicality of your blinds. Just be sure to take accurate measurements and use the appropriate tools for a clean, professional-looking result. Now, go ahead and enjoy your beautifully tailored faux wood blinds!

Leave a Comment